zenpower3/README.md

# Zenpower
Zenpower is Linux kernel driver for reading temperature, voltage(SVI2), current(SVI2) and power(SVI2) for AMD Zen family CPUs.

Make sure that your Linux kernel have support for your CPUs as Zenpower is using kernel calls to read values from SMN.
For AMD family 17h Model 70h (Ryzen 3000) CPUs you need kernel with this patch: https://patchwork.kernel.org/patch/11043277/

## Installation
You can install this module via dkms.

### Installation commands for Ubuntu
```
sudo apt install dkms git build-essential linux-headers-$(uname -r)
cd ~
git clone https://github.com/ocerman/zenpower.git
cd zenpower
sudo make dkms-install
```

## Module activation
Because zenpower is using same PCI device as k10temp, you have to disable k10temp first.

1. Check if k10temp is active. `lsmod | grep k10temp`
2. Unload k10temp `sudo modprobe -r k10temp`
3. (optional) blacklist k10temp: `sudo bash -c 'sudo echo -e "\n# replaced with zenpower\nblacklist k10temp" >> /etc/modprobe.d/blacklist.conf'`
4. Activate zenpower `sudo modprobe zenpower`

## Sensors monitoring
You can use this app: [zenmonitor](https://github.com/ocerman/zenmonitor), or your favourie sensors monitoring software

## Update instructions
1. Unload zenpower `sudo modprobe -r zenpower`
2. Goto zenpower directory `cd ~/zenpower`
3. Uninstall old version `sudo make dkms-uninstall`
4. Update code from git `git pull`
5. Install new version `sudo make dkms-install`
6. Activate zenpower `sudo modprobe zenpower`

## Known Issues
 - On some systems the SVI2 values for Core/SOC may be swapped. As a workaround you can install module with `sudo make dkms-install MCFLAGS=-DSWAP_CORE_SOC` to swap them back.
 - The formula for calculating amperage/wattage from raw values may not be correct for all systems.