mirror of
https://github.com/MetaCubeX/mihomo.git
synced 2024-06-17 12:06:58 +00:00
chore: update docs
This commit is contained in:
xishang0128
parent
2e87c6f4da
commit
22862f20cc
|
|
@ -112,25 +112,25 @@ tun:
|
|||
# gso: false # 启用通用分段卸载, 仅支持 Linux
|
||||
# gso-max-size: 65536 # 通用分段卸载包的最大大小
|
||||
# strict-route: true # 将所有连接路由到tun来防止泄漏，但你的设备将无法其他设备被访问
|
||||
inet4-route-address: # 启用 auto_route 时使用自定义路由而不是默认路由
|
||||
inet4-route-address: # 启用 auto-route 时使用自定义路由而不是默认路由
|
||||
- 0.0.0.0/1
|
||||
- 128.0.0.0/1
|
||||
inet6-route-address: # 启用 auto_route 时使用自定义路由而不是默认路由
|
||||
inet6-route-address: # 启用 auto-route 时使用自定义路由而不是默认路由
|
||||
- "::/1"
|
||||
- "8000::/1"
|
||||
# endpoint-independent-nat: false # 启用独立于端点的 NAT
|
||||
# include_interface: # 限制被路由的接口。默认不限制, 与 `exclude_interface` 冲突
|
||||
# include-interface: # 限制被路由的接口。默认不限制, 与 `exclude-interface` 冲突
|
||||
# - "lan0"
|
||||
# exclude_interface: # 排除路由的接口, 与 `include_interface` 冲突
|
||||
# exclude-interface: # 排除路由的接口, 与 `include-interface` 冲突
|
||||
# - "lan1"
|
||||
# include-uid: # UID 规则仅在 Linux 下被支持，并且需要 auto_route
|
||||
# include-uid: # UID 规则仅在 Linux 下被支持，并且需要 auto-route
|
||||
# - 0
|
||||
# include-uid-range: # 限制被路由的的用户范围
|
||||
# - 1000-99999
|
||||
# - 1000:9999
|
||||
# exclude-uid: # 排除路由的的用户
|
||||
#- 1000
|
||||
# exclude-uid-range: # 排除路由的的用户范围
|
||||
# - 1000-99999
|
||||
# - 1000:9999
|
||||
|
||||
# Android 用户和应用规则仅在 Android 下被支持
|
||||
# 并且需要 auto-route
|
||||
|
|
@ -651,9 +651,8 @@ proxies: # socks5
|
|||
type: hysteria
|
||||
server: server.com
|
||||
port: 443
|
||||
# ports: 1000,2000-3000,5000 # port 不可省略,
|
||||
auth_str: yourpassword # 将会在未来某个时候删除
|
||||
# auth-str: yourpassword
|
||||
# ports: 1000,2000-3000,5000 # port 不可省略
|
||||
auth-str: yourpassword
|
||||
# obfs: obfs_str
|
||||
# alpn:
|
||||
# - h3
|
||||
|
|
@ -662,14 +661,11 @@ proxies: # socks5
|
|||
down: "200 Mbps" # 若不写单位，默认为 Mbps
|
||||
# sni: server.com
|
||||
# skip-cert-verify: false
|
||||
# recv_window_conn: 12582912 # 将会在未来某个时候删除
|
||||
# recv-window-conn: 12582912
|
||||
# recv_window: 52428800 # 将会在未来某个时候删除
|
||||
# recv-window: 52428800
|
||||
# ca: "./my.ca"
|
||||
# ca_str: "xyz" # 将会在未来某个时候删除
|
||||
# ca-str: "xyz"
|
||||
# disable_mtu_discovery: false
|
||||
# disable-mtu-discovery: false
|
||||
# fingerprint: xxxx
|
||||
# fast-open: true # 支持 TCP 快速打开，默认为 false
|
||||
|
||||
|
|
@ -710,7 +706,7 @@ proxies: # socks5
|
|||
# dialer-proxy: "ss1"
|
||||
# remote-dns-resolve: true # 强制dns远程解析，默认值为false
|
||||
# dns: [ 1.1.1.1, 8.8.8.8 ] # 仅在remote-dns-resolve为true时生效
|
||||
# 如果peers不为空，该段落中的allowed_ips不可为空；前面段落的server,port,ip,ipv6,public-key,pre-shared-key均会被忽略，但private-key会被保留且只能在顶层指定
|
||||
# 如果peers不为空，该段落中的allowed-ips不可为空；前面段落的server,port,ip,ipv6,public-key,pre-shared-key均会被忽略，但private-key会被保留且只能在顶层指定
|
||||
# peers:
|
||||
# - server: 162.159.192.1
|
||||
# port: 2480
|
||||
|
|
@ -718,7 +714,7 @@ proxies: # socks5
|
|||
# ipv6: fd01:5ca1:ab1e:80fa:ab85:6eea:213f:f4a5
|
||||
# public-key: Cr8hWlKvtDt7nrvf+f0brNQQzabAqrjfBvas9pmowjo=
|
||||
# # pre-shared-key: 31aIhAPwktDGpH4JDhA8GNvjFXEf/a6+UaQRyOAiyfM=
|
||||
# allowed_ips: ['0.0.0.0/0']
|
||||
# allowed-ips: ['0.0.0.0/0']
|
||||
# reserved: [209,98,59]
|
||||
|
||||
# tuic
|
||||
|
|
@ -1014,42 +1010,42 @@ listeners:
|
|||
type: tun
|
||||
# rule: sub-rule-name1 # 默认使用 rules，如果未找到 sub-rule 则直接使用 rules
|
||||
# proxy: proxy # 如果不为空则直接将该入站流量交由指定proxy处理(当proxy不为空时，这里的proxy名称必须合法，否则会出错)
|
||||
stack: system # gvisor / lwip
|
||||
stack: system # gvisor / mixed
|
||||
dns-hijack:
|
||||
- 0.0.0.0:53 # 需要劫持的 DNS
|
||||
- 0.0.0.0:53 # 需要劫持的 DNS
|
||||
# auto-detect-interface: false # 自动识别出口网卡
|
||||
# auto-route: false # 配置路由表
|
||||
# mtu: 9000 # 最大传输单元
|
||||
inet4-address: # 必须手动设置ipv4地址段
|
||||
- 198.19.0.1/30
|
||||
- 198.19.0.1/30
|
||||
inet6-address: # 必须手动设置ipv6地址段
|
||||
- "fdfe:dcba:9877::1/126"
|
||||
# strict_route: true # 将所有连接路由到tun来防止泄漏，但你的设备将无法其他设备被访问
|
||||
# inet4_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
|
||||
# - 0.0.0.0/1
|
||||
# - 128.0.0.0/1
|
||||
# inet6_route_address: # 启用 auto_route 时使用自定义路由而不是默认路由
|
||||
# - "::/1"
|
||||
# - "8000::/1"
|
||||
# endpoint_independent_nat: false # 启用独立于端点的 NAT
|
||||
# include_uid: # UID 规则仅在 Linux 下被支持，并且需要 auto_route
|
||||
- "fdfe:dcba:9877::1/126"
|
||||
# strict-route: true # 将所有连接路由到tun来防止泄漏，但你的设备将无法其他设备被访问
|
||||
# inet4-route-address: # 启用 auto-route 时使用自定义路由而不是默认路由
|
||||
# - 0.0.0.0/1
|
||||
# - 128.0.0.0/1
|
||||
# inet6-route-address: # 启用 auto-route 时使用自定义路由而不是默认路由
|
||||
# - "::/1"
|
||||
# - "8000::/1"
|
||||
# endpoint-independent-nat: false # 启用独立于端点的 NAT
|
||||
# include-uid: # UID 规则仅在 Linux 下被支持，并且需要 auto-route
|
||||
# - 0
|
||||
# include_uid_range: # 限制被路由的的用户范围
|
||||
# - 1000-99999
|
||||
# exclude_uid: # 排除路由的的用户
|
||||
# include-uid-range: # 限制被路由的的用户范围
|
||||
# - 1000:99999
|
||||
# exclude-uid: # 排除路由的的用户
|
||||
# - 1000
|
||||
# exclude_uid_range: # 排除路由的的用户范围
|
||||
# - 1000-99999
|
||||
# exclude-uid-range: # 排除路由的的用户范围
|
||||
# - 1000:99999
|
||||
|
||||
# Android 用户和应用规则仅在 Android 下被支持
|
||||
# 并且需要 auto_route
|
||||
# 并且需要 auto-route
|
||||
|
||||
# include_android_user: # 限制被路由的 Android 用户
|
||||
# include-android-user: # 限制被路由的 Android 用户
|
||||
# - 0
|
||||
# - 10
|
||||
# include_package: # 限制被路由的 Android 应用包名
|
||||
# include-package: # 限制被路由的 Android 应用包名
|
||||
# - com.android.chrome
|
||||
# exclude_package: # 排除被路由的 Android 应用包名
|
||||
# exclude-package: # 排除被路由的 Android 应用包名
|
||||
# - com.android.captiveportallogin
|
||||
# 入口配置与 Listener 等价，传入流量将和 socks,mixed 等入口一样按照 mode 所指定的方式进行匹配处理
|
||||
# shadowsocks,vmess 入口配置（传入流量将和socks,mixed等入口一样按照mode所指定的方式进行匹配处理）
|
||||
|
|
|
|||
Loading…
Reference in a new issue