72 lines
2.3 KiB
Markdown
72 lines
2.3 KiB
Markdown
# Zenmonitor3
|
|
Zenmonitor3 is monitoring software for AMD Zen-based CPUs.
|
|
|
|
It can monitor these values:
|
|
- CPU Temperature
|
|
- CPU Core (SVI2) Voltage, Current and Power
|
|
- SOC (SVI2) Voltage, Current and Power
|
|
- Package and Core Power (RAPL)
|
|
- Core Frequency (from OS)
|
|
|
|
|
|
|
|
## Dependencies
|
|
- [zenpower3 driver](https://github.com/Ta180m/zenpower3) - For monitoring CPU temperature and SVI2 sensors
|
|
- MSR driver - For monitoring Package/Core Power (RAPL)
|
|
|
|
Follow [zenpower README.md](https://github.com/Ta180m/zenpower3/blob/master/README.md) to install and activate zenpower module.
|
|
Enter `sudo modprobe msr` to enable MSR driver.
|
|
|
|
## Building
|
|
Make sure that GTK3 dev package and common build tools are installed.
|
|
```sh
|
|
make
|
|
```
|
|
|
|
## Launching
|
|
You can launch app by `sudo ./zenmonitor`, or you can install it to your system and then launch it from your OS menu.
|
|
|
|
Note: Because superuser privileges are usually needed to access data from MSR driver, you need to launch zenmonitor as root for monitoring CPU power usage (RAPL).
|
|
Alternatively, you can set capabilities to zenmonitor executable: `sudo setcap cap_sys_rawio,cap_dac_read_search+ep ./zenmonitor`
|
|
|
|
## Command line arguments
|
|
|
|
``--coreid`` - Display core_id instead of core index
|
|
|
|
## Installing
|
|
By default, Zenmonitor3 will be installed to /usr/local.
|
|
```sh
|
|
sudo make install
|
|
```
|
|
|
|
To add menu item for launching zenpower as root (Polkit is required):
|
|
```sh
|
|
sudo make install-polkit
|
|
```
|
|
|
|
## Uninstalling
|
|
```sh
|
|
sudo make uninstall
|
|
```
|
|
|
|
## Setup on Ubuntu
|
|
First follow [installation instructions on zenpower3](https://github.com/Ta180m/zenpower3/blob/master/README.md#installation-for-ubuntu)
|
|
Then:
|
|
```sh
|
|
sudo modprobe msr
|
|
sudo bash -c 'echo "msr" > /etc/modules-load.d/msr.conf'
|
|
sudo apt install build-essential libgtk-3-dev libncurses5-dev git
|
|
cd ~
|
|
git clone https://github.com/Ta180m/zenmonitor3
|
|
cd zenmonitor3
|
|
make
|
|
sudo make install
|
|
sudo make install-polkit
|
|
```
|
|
|
|
## Setup on Arch
|
|
You may use the AUR package [zenmonitor3-git](https://aur.archlinux.org/packages/zenmonitor3-git/) to install via [traditional method](https://wiki.archlinux.org/index.php/Arch_User_Repository) or using an AUR helper.
|
|
|
|
## Installation for Fedora 35+
|
|
You can install it from the [copr package repo](https://copr.fedorainfracloud.org/coprs/birkch/zenpower3/)
|